You asked: Can you use a forklift to lift a person?

The OSHA rule for forklifts at construction sites at 29 CFR 1926.602(c)says trucks with lifting carriages or forks for lifting personnel must use a safety platform firmly secured to the lifting carriage or forks. … Consequently, OSHA prohibits the use of such equipment to elevate personnel.

Can a forklift be used as a man lift?

If the manufacturer’s operator manual states that a forklift is not to be used for elevating personnel platforms, use of the equipment to support such a platform would violate this provision. Consequently, OSHA prohibits the use of such equipment to elevate personnel.

Can forklifts carry passengers?

Forklifts are for carrying loads only, and should never carry people. There is a reason there is only one seat, and that’s for the forklift operator only. No passengers!

What can you not do with a forklift?

Make abrupt or quick turns. Travel on uneven ground unless the truck is designed to do so. Run over unprotected cables or pipes. Operate a truck under the influence of drugs or alcohol.

IT IS IMPORTANT:  Quick Answer: Do tower cranes have elevators?

What can you lift with a forklift?

Most industrial forklifts can lift 5,000 lbs of weight, but some heavy-duty models are capable of elevating up to 25,000 lbs. There are a few subtypes of the warehouse forklift, including the side loader and counterbalance forklift.

Can you use a forklift as a platform?

Work platforms and boxes

Forklifts may be used to provide a safe work platform if they are designed to lift people (see Figures 1 and 2). Workboxes should only be used to raise people performing occasional tasks and must be securely attached to the forklift.

Are Man baskets allowed on a forklift?

Additions such as fork extension and man basket or any modification to the forklift can affect the load capacity and safe operation of the truck. The forklift manufacturer prohibits such addition or alteration unless they allow it so. … They fail to contact the forklift manufacturer to secure written approval.

What are the OSHA regulations for forklift?

OSHA 29 CFR 1910.178(I) requires that employers provide forklift operators training for vehicle inspection and maintenance. Operators must be over 18 years of age and be recertified at least once every three years. The similar CSA standard is B335-04 (R2012).

How do you carry a load on a forklift?

Carrying the load

Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back. Use caution when carrying a load on an uneven surface; it creates a tip-over hazard.

How far should a pedestrian be from a forklift?

What Is a Safe Distance Between Forklifts and Pedestrians? Ideally, you should keep a forklift as far away from pedestrians as possible. In areas where pedestrians are present, a minimum distance of 4 ft. is necessary.

IT IS IMPORTANT:  What does hydraulic lift mean?

Can you operate a forklift with one hand?

It is important for forklift operators to be able to:

Use one or two hands to grasp, move, or assemble objects. See details of objects that are more than a few feet away. … Adjust body movements or equipment controls to keep pace with speed changes of moving objects.

Are you supposed to drive a forklift with 2 feet?

You should have two feet and a hand or two hands and a foot in contact with the vehicle at all times. … Always keep a minimum of three vehicle distances in between any operational forklifts when driving in the same direction.

Can you wear headphones while driving a forklift?

OSHA has issued citations to employers following industrial accidents where employees have operated equipment (such as forklifts) while wearing headphones and have been unable to hear horns or other audio warnings. … Headphones can create a serious impediment to timely evacuation and result in a tragedy.

How much can a forklift lift?

Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate. OSHA requires “only loads within the rated capacity of a truck shall be handled.” It’s easy to think the rated capacity is the same as maximum capacity, but it’s not that simple.

What if two forklifts lift each other?

In theory, two forklifts should be able to lift much more than one forklift, but that is not the case because the drivers have to contend with: … Getting the second forklift close enough to the load so that the load is effectively and safely on the tines or forks.

IT IS IMPORTANT:  Does OSHA require safety harness scissor lift?

How do you move a forklift with a forklift?

Center the forklift side to side in or on the transport vehicle. Lower the forks to the floor and tilt them forward. Place wood blocks behind each wheel of the forklift for stabilization. Fasten the blocks in place by driving screws into the blocks and into the wooden floor of the transport vehicle.