What years were Ford 9N tractors made?

What year did Ford stop making the 9N tractor?

The Ferguson-Sherman company, which made plow and tractor parts, marketed the Model 9N for sales distribution from 1939-1946. After the war, all production of the Ford Model 9N tractor was halted. In 1946, the relationship between Harry Ferguson and Ford Motor Company severed.

How do I tell what year my 9N Ford tractor is?

The 9 was for the year, 1939, and N was Ford’s designation for tractor. The original price was $585. The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.

What is a Ford 9N tractor worth?

A good condition Ford 9n tractor is about $3,000 if it’s a later model. A Ford 9n Tractor from the 1940’s is about $1,500. A mint condition 1939 Ford 9n tractor was going for $15,000 on the internet.

IT IS IMPORTANT:  How do you ruin a lawn mower engine?

Which is better Ford 8N or 9N?

This is the main difference between the 8n and 9n Ford tractors; and as you’d expect, the 8n has a number of improvements that make it better than the 9n. One such improvement comes in horsepower. The engines on the 8n tractors are generally a bit more powerful than those on 9n tractors.

Does 9N have live PTO?

One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

How do you tell a 2N from a 9N?

If the dipstick is on the inspection cover, you are definitely looking at a later 2N. If the serial number is readable, don’t assume that a “9N” prefix indicates a 9N tractor – as noted before, 2N tractors used this prefix as well.

What year is my tractor?

When you want to identify the year of your tractor, you can look at several things. First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.

When did Ford tractors change from red to blue?

During the early 1960’s, during the switch to blue paint, there was an effort by dealers to re-paint older tarctors on their lots, in order to present them as “new”. I know of a Ford 800 that is GREEN – and, it too, shows no evidence of ever being red.

IT IS IMPORTANT:  What size trailer do I need for a 52 inch lawn mower?

How much does a Ford 9N tractor weigh?

The ford 9N engine was a side-valve, four-cylinder engine, with a 3.19-inch (81 mm) bore, 3.75-inch (95 mm) stroke, providing a displacement of 120 cubic inches (2,000 cm3). The transmission was the standard three-speed. The finished tractor weighed 2,340 pounds (1,060 kg), and initially sold for US$585.

When did they stop making Ford tractors?

Ford was the only automotive firm to sell cars, trucks and tractors simultaneously from 1917 to 1928. For a decade between 1928 and 1939, Ford of the U.S. left the tractor business.

How many horsepower is a Ford 800 tractor?

The “800” and “900” both had around 40 HP with the “900” as the row crop tractor. The “1” Series. From 1957-62, Ford brought out a series where all the model numbers ended in a “1.” The first numeral – the ‘hundreds’ place – indicated the relative power and configuration.

How many horsepower does a Ford 9N have?

Ford 9N

Ford 9N Power
Drawbar (claimed): 12.68 hp 9.5 kW
Belt (claimed): 20.29 hp 15.1 kW
Plows: 2 (14-inch)
Drawbar (tested): 16.31 hp 12.2 kW

How much did a Ford 8N tractor cost new?

Ford 8N Tractor Original Price is $1,404 USD (1952 ).

What is a live PTO?

Live (two-stage clutch)

A live PTO works with the use of a two-stage clutch. Pressing the clutch half-way will disengage the transmission while pressing it fully will disengage the transmission and the PTO. This allows the operator to slow down or change gears while the PTO is still operating.