**Contents**show

Keep in mind that several factors will influence how long it will take to excavate your job site, and times can vary considerably. However, excavation for a foundation can range from 3 to 4 days on up to 3 weeks. Generally, the worst-case scenario will involve a 10-foot over dig.

## How much excavation can be done in a day?

That means, a hydraulic excavator can excavate 242.4242 m^{3} of soil in one day. Its cost per day including driver and fuel is Rs. 5000.

## How much can a man dig in an hour?

Digging in Medium Soil: Manual excavation standard output rate for excavating in medium soil for trenches 4 to 6 feet deep: 0.54 cy per hour.

## How much do excavators dig a day?

The History of the Excavator

The machine could move up to 300 cubic yards a day compared to the 12 cubic yards that could be moved by a man.

## How many cubic yards can be excavated in an hour?

One cubic yard of soil removed. We figure 20 cubic yards of soil remove per hour of backhoe time (with operator), plus an hour of unskilled labor per 12 cubic yards of soil. Goldenseal calculates foundation hole volume, based on the area and depth.

## How much should I charge for excavation?

Excavation Costs

A typical residential excavation job runs between $1,453 and $5,458 with an average of $3,406. Though most companies charge anywhere from $40 to $150 an hour, residential jobs receive project bids. Project bids reflect cubic yards of dirt moved, anywhere from $50 to $200 per cubic yard.

## What is the excavation cost?

The cost of excavation is generally estimated by multiplying the total excavation volume to the excavation price per unit. For ex : Let us assume that you want to excavate a pit of size : 2 x 2 x 2 meter. The market price for excavation is 10$/cu. m.

## How long does it take to dig by hand?

Pace yourself, as a steady pace is always best

For instance, digging a hole about 4′ deep, by 3′ wide, by 4′ long takes anywhere from 1 hour to 4 hours. It depends on the ground conditions, and the ability of who’s digging the hole.

## How long does it take to dig 6 feet?

How long does it take to dig a 6ft deep hole? It takes 0.07 hours (4.24 minutes) to dig 1.23 cubic yards of earth in stable soil. This means it takes 4.24 minutes to dig a 6 foot deep hole of 16 inches diameter.

## How long does it take to dig with an excavator?

Dug, pipe laid and backfilled about 11 to 13hours, only digging can be done in 9 hours or so. We average 280-300 ft per hour digging a 48″ deep trench with an excavator putting in non grade lines to pivots.

## How long does it take to trench 100 feet?

It takes about 12 hours to dig 100 linear feet of trench. Measure the number of linear feet you need to dig and multiply that by 0.12 for an approximate labor period.

## How much can a JCB excavate per hour?

The excavation capacity of the JCB ranges from 700 cu ft. to 1100 cu ft. per hour, depending upon the type of soil & bucket capacity.

## How long does it take to dig a trench with a backhoe?

Dug, pipe laid and backfilled about 11 to 13hours, only digging can be done in 9 hours or so. We average 280-300 ft per hour digging a 48″ deep trench with an excavator putting in non grade lines to pivots.

## How much excavation can be done in a day by JCB?

A jcb can dig as much as 70 c. meter/day. The eight hours would cost 8000 to 10,000 rupees.

## How many feet can an excavator dig in a day?

“That’s one trench with one operator, opening up 10,000 feet of trench per day, whereas one excavator can open up 1,000 to 1,500 feet per day.

## How much can an excavator move?

It can reach 62 feet in the air and use a 21,600-pound shear. It can also be easily adapted to reach 124 feet in the air with a 5,700-pound shear. The largest excavators make the most sense on job sites that require a lot of material to be moved in an efficient manner.